Lompat ke konten Lompat ke sidebar Lompat ke footer

PSPlay

Introduction


Give thanks you for downloading and using PSPlay, this guide summarizes the most important information of PSPlay.

Disclaimer: PS5, PS4, PlayStation five, PlayStation 4, Dualsense, Dualshock and PSN are trademarks of Sony Estimator Entertainment Inc. PSPlay is in no fashion endorsed by or affiliated with Sony Estimator Entertainment Inc, or any associated subsidiaries, logos or trademarks.

Requirements for PSPlay

You need to meet following requirements to fully enjoy PSPlay.

  1. PS5 or PS4 panel
  2. Android device with at least Android 5.0
  3. Dual core CPU highly recommended
  4. 2 GB or more than of RAM
  5. 1024 × 768 or college display resolution
  6. A wired internet connection for your PS5/ PS4 is strongly recommended
  7. Your smartphone should be connected to a 5GHz WiFi for minimum delays
  8. A high-speed internet connexion with upload and download speeds of at least fifteen Mbps

PSPlay even works on low end smartphones. However proceed in mind to lower the resolution and the fps settings for such devices in order to guarantee good operation and low latency while streaming.

Registration #back to height

If y'all apply PSPlay for the first time you have to register your PS5/ PS4 with PSPlay. This is just possible when you are in the same network than your PlayStation, a registration from outside your network is non supported considering of security reasons. The following sections will enlighten you most the most of import data

Step one - Exist sure your smartphone and your PlayStation are connected to the same network. Ideally your PS5/ PS4 is using a wired net connection via a LAN cablevision to provide all-time streaming performance.

Pace ii - In order to activate Remote Play on your PS5/ PS4 you must be logged in with your PSN business relationship on your PS5/ PS4.

On your PS5 navigate to Settings - System - Remote Play and activate "Enable Remote Play". So go to Link Device where you should see the 8 digit registration number.

On your PS4 navigate to Settings - Remote Play Connection Settings and actuate the "Enable Remote Play" checkbox. So go to Add device where you should run across the 8 digit registration number.

Step three - Open up PSPlay and click the "Register PS" button. On the next screen you can cull if you desire to annals a PS5 or a PS4. If you have made your conclusion you lot tin enter the 8 digit registration number on the next screen. If you want to annals a PS4 with an older firmware y'all can choose the firmware of your PS4 in the drop-downward listing. If yous do not know what that means just go out the default values. PSPlay supports PS4 firmware from 5.05 - 8.03+. If y'all are ready Click the "Register" button on the bottom of the screen.

Step 4 - You lot will now see the official Sony account website. At this point you must sign in to your PSN account which you want to use for Remote Play. If you do not want to sign in you tin can too actuate the "Annals PS4 manually" checkbox in the previous screen. However since the PS4 firmware 7.0 Sony requires the Business relationship-ID for the registration procedure which is unique number linked to your PSN-Account. If you do not know it by center your simply choice is to continue with the sign in process. If you apply an older firmware than 7.0 you can just utilise your well known Online-ID (Your PSN user name) during the manual registration process. Delight continue in mind that without a PSN login an automatic remote connectedness over the internet volition not be possible.

Disclaimer from the developer: I know providing your account details seems to be shady and I wished there would be some other method to become the Account-ID but unfortunately there is no other piece of cake way and some features like the automatic remote connection over the internet are only working via PSN. However, PSPlay simply opens the official PSN Log-In website from Sony and there is no technical manner that PSPlay could in any manner intercept, monitor or alter the information you have entered there. PSPlay just receives some generic profile data as response from the official Sony server and just the Business relationship-ID and the Online-ID will exist stored locally on your device. If really want to avoid using PSN read this. If you accept some additional questions experience free to contact me at f.grill160@gmail.com.

Stride 5 - If the registration was successful you lot volition be redirected to the Home screen of PSPlay where you lot can now cull to "Local Connect" or "Remote Connect" to your PS5/ PS4. If yous received an error please go to Troubleshooting

Connexion #back to top

In one case you have successfully registered your PS5/ PS4, you can choose "Local Connect" or "Remote Connect" in the Home view of PSPlay to establish a connection to your console. If you are on the same network than your PlayStation merely click "Local Connect". If you have problems with "Local Connect" or if you want to play over the internet choose "Remote Connect". In order to connect remotely you must configure port forwarding rules on your router at home or since PSPlay 5.0.0 y'all can activate the automated remote connection feature in the streaming settings of PSPlay to automatically connect over the internet without the need to configure your router, see department Playing over the internet for more than information) In one case the automatic remote connexion feature is enabled in the streaming settings your tin can choose if y'all want to connect manually or automatically. If you choose connect manually, you tin either enter the IP address of your PlayStation if you are in the aforementioned network than your panel or the IP address of your router if you want to connect from outside your network at home.

PSPlay also allows you lot to merely connect as controller without audio and video streaming and then that you can use your smartphone as Dualshock controller. Just click on the three dots in the upper right corner in the Domicile view of PSPlay, and click "Gamepad Mode". If you want to utilize PSPlay as second gamepad in add-on to your real Dualsense/ Dualshock controller yous must have at to the lowest degree a second PS5/ PS4 guest contour on your PS5/ PS4. The real Dualshock controller must then be connected to the PS5/ PS4 profile which is not currently used by the PSPlay Remote Play customer, otherwise the Remote Play connection will be terminated. During the gamepad mode no Audio and Video stream will be processed but the panel is sending these data anyway so delight keep in listen that this will have an bear on on your internet traffic.

Layouts and Profiles #dorsum to elevation

PS5/ PS4 Profiles

Unlike the official PS Remote Play app PSPlay can exist registered with multiple PS5/ PS4 profiles. A contour is linked to 1 specific PSN account on one specific PS5/ PS4 console. If you have multiple PS5/ PS4 consoles and/ or multiple PSN accounts, PSPlay is able to register more than 1 profile. If you have already registered a profile just open up navigation drawer on the top left corner of the Home screen and click "Annals new PS5/ PS4". You can switch to another PS5/ PS4 profile by clicking "Profiles" in the navigation drawer and click on the "PS5/ PS4 profile" setting entry on the next screen.


On-Screen gamepad layouts

PSPlay offers you the possibility to customize the on-screen gamepad layout for both the "Remote Play Fashion" and the "Gamepad Mode". You tin either create a new remote layout by clicking "Remote layout" or you lot tin can create a new gamepad layout by clicking "Gamepad layout" in the navigation drawer. Y'all can switch the layouts by clicking "Profiles" in the navigation drawer and click on the "Remote gamepad layout" for changing the remote layout or the "Gamepad layout" for irresolute the gamepad layout.

Supported gamepads #back to top

Yous can connect any controller which is compatibly with Android v.0 an above via Bluetooth or USB. Considering of functioning problems due hardware limitations on many Android devices it is strongly recommended to use a wired USB connection for your gamepad. Otherwise loftier input latency and input delays tin can occur. If y'all ever encounter some unusual lags please connect your gamepad via USB if possible. Delight note that this is not the mistake of PSPlay, the reason why this happens is because of some hardware limitations of your Android device and that there is no fashion that PSPlay could fix this.

If the button mapping of your controller is weird you can create a button mapping contour for your controller past clicking "Button mapping" in the navigation drawer. If i of your gamepad buttons is recognized as Home button you lot will non exist able to apply this button as an app can not override this behaviour. However, you lot can and then use the "Utilise 2 buttons combination" feature in the mapping process instead. If you encounter some unusual button mapping please feel free to contact me at f.grill160@gmail.com

Playing over the cyberspace #dorsum to meridian

Note from the programmer: Please read this whole section carefully and follow ALL instructions. If something isn't working every bit expected it's most probable that your isp is non allowing it. You can find all the information below.

PSPlay tin also be used over the internet when yous are not at home. You tin can either activate the automatic remote connexion feature in the streaming settings or you lot can configure your router manually so that you tin can connect from abroad without using PSN (east.g. if you are using a jailbroken PlayStation)

Automatic configuration

Since PSPlay version 5.0.0 you can automatically connect to your PlayStation over the internet. If you have already registered PSPlay with your PlayStation with an older version than PSPlay v.0.0 please re-annals PSPlay with your console. During the registration process information technology is required to perform a PSN login equally the automatic remote connexion requires PSN credentials. Once successfully registered you can activate the "automated remote connexion" feature in the streaming settings of PSPlay. If y'all have PSN login problems please read this. You can then use the automated remote connection feature when your click "Remote Connect" in the Dwelling house view of PSPlay. Please note that this feature is currently experimental and that it may non work in all networks. It may fail for instance if your PlayStation has NAT type iii. More information about the NAT types can be found hither. One reason why your PlayStation is displaying NAT Type 3 could be that your Internet service provider is not assigning a real public IP accost to your router, if that is the instance you lot must call your isp and ask if they could assign your router a real public IP accost.

activate auto remote connection setting

At that place are also some requirements in order to be able to automatically connect to your PlayStation over the internet without the need to configure your router at habitation

  1. Your PlayStation must be continued with PSN
  2. Your PlayStation must have the latest firmware installed
  3. A PSN login must be performed with PSPlay during the registration process
  4. If you have multiple PS4 consoles y'all can only connect remotely to the panel which is configured every bit principal console. This is a limitation from Sony and this limitation doesn't exist on the PS5.

If some of these requirements can't be fulfilled yous must configure your router in social club to be able to constitute a connection over the internet. All information available below.

Transmission configuration

The post-obit section explains how to manually configure port forwarding on your router.

In order to configure your router y'all must admission your router'southward dashboard. To configure your router you must exist in the aforementioned network than your router (e.g. your WiFi network at home). Information technology is recommended to exercise this on a PC only can of course too be performed on any other device which has a web browser. Open a web browser such as Google Chrome or similar. Go to the Accost bar and enter the IP Address of your router. If yous don't know the IP address of your router click here for an explanation of how to find information technology out.

If you are on your router's dashboard you lot have to navigate to the port forwarding section. Delight note that each dashboard looks different, it could probably be located under "WAN" settings, "Internet" settings or similar. Following ports to the internal IP-Address of your PS5/ PS4 must be forwarded:

! You must forward ALL of the following ports and yous must use the right protocol for the ports! (Please note: port 9295 is UDP AND TCP) !

  • UDP 9302 (PS5 only!)
  • UDP 987 (PS4 only!)
  • UDP & TCP 9295
  • UDP 9296
  • UDP 9297

You tin can detect below an case of how the port forwarding settings should expect like if you configure port forwarding for your PS4 (but information technology might expect a little chip unlike on your router then but keep that in heed). Some routers allow the configuration of an external and internal port, others do not. If y'all can configure an external and internal port provide the same port on both of them. Please note that you don't need UDP port 987 but UDP port 9302 if you configure port forwarding for PS5.

Port forwarding example

Once y'all've set port forwarding correctly, you need to effigy out the public IP-Address of your router. Go to https://www.whatsmyip.org/ with a device connected to your network at home, then enter the IP-Address you get in that location into the "Remote Connect" dialog of PSPlay. If you don't get an error, you lot should exist all set. Keep in mind that the public IP-Address of your router can change from time to time, this depends on your net provider. So if streaming over the net is suddenly stop working and it worked earlier perfectly fine, please be sure to check the public IP-Address of your router again. Furthermore, it is strongly recommended to configure a static IP-Address for your PS5/ PS4. Otherwise you will have to adjust port forwarding settings every fourth dimension your PS5/ PS4 gets some other IP-Accost from your router (which could occur every fourth dimension the PS5/ PS4 restarts). An instance of how to configure a static IP for your PS5/ PS4 can exist found Here.

You tin find a guide on how to port frontward on most routers HERE (Don't be bothered by the "Portforward Network Utilities" ad, just shut information technology, this is not required).

If you become an mistake like "IO_EXCEPTION_OCCURRED. GET Session" or "Connection failure! A connection could not be established" upon using "Remote Connect" multiple times and then there might exist something wrong with the port forwarding settings or your internet provider might not let information technology. Please keep on reading for further instructions.

Some routers let y'all to configure a port range (start and stop point port) or fifty-fifty to configure an internal and external port. If that is the example just provide the same port on all these available options.

If port forwarding is configured correctly you should be able to connect to your PS5/ PS4 by using the "Remote Connect" push button on the Home screen of the PSPlay app. You would need to enter the public IP-Address of your router. Go along in mind that you MUST enter the public IP-Accost of your router in the "Remote Connect" dialoag and Not the IP of your PS5/ PS4 if you want to connect from outside your network.

You can verify if the port forwarding was configured correctly by visiting following website https://world wide web.canyouseeme.org/ with a device connected to your network at home (same network than your panel) and enter port 9295 in the "Port to Check" textbox. Canyouseeme should report that the port is open, if not be sure your PS5/ PS4 is turned on. If it is turned on and the website is still reporting that the port is non open so in that location is something wrong. Other ports are just active while streaming so you must enter simply port 9295. If the other ports are configured correctly and canyouseeme reports that port 9295 is open connecting over the internet should piece of work fine when you enter the public IP-Address of your router into the "Remote Connect" dialog of PSPlay.

If something did not piece of work please double check if you lot have configured the correct protocol for the individual port mapping rules on your router (UDP/ TCP). Port 9295 needs two rules, ane for UDP and one for TCP. If you still accept some problems, please check if the public IP-Address which you lot should see somewhere on the dashboard of your router (probably in the WAN section) is equal to the one which yous get by visiting https://www.whatsmyip.org/ with a device within your network at home. If non, then this is probably an indication that your internet provider doesn't give your router a "real" public IP-Accost, which means your router is not accessible over the internet. If that is the instance you accept to contact your internet provider and ask if they could provide you a "existent" public IP-Address, otherwise connecting to your PS5/ PS4 from outside will not exist possible for you.

Another trouble could be if your internet provider doesn't provide your router an IPv4 merely only an IPv6 IP-Address. Equally remote play does not support IPv6 you must contact your internet provider and ask if they could besides assign an IPv4 address to your router in addition to the IPv6 accost. Delight note, if y'all are affected by the last 2 problems (no "real" public IP-Address, simply an IPv6 IP-Accost) there is cipher PSPlay can practise nigh. Providing a bad rating doesn't help either as I tin't workaround these errors. If you lot have any specific questions only contact me Earlier providing a bad rating.

Delight notation: the connection quality and streaming latency heavily depends on the quality of your cyberspace connection and on many other external factors. If at that place are lot of interferences please try to reduce the resolution and the FPS settings.

UPnP auto configuration #back to top

If the automatic remote connection feature doesn't work for you, PSPlay can automatically configure your router for playing over the internet simply your router has to support UPnP and this characteristic must be enabled on your router. Please note, not all routers support UPnP or practise not allow an automated configuration considering of security reasons. If PSPlay reports that it is not able to notice your router or that an other error occurred you must configure your router manually. You tin observe more data here. As there are thou of different router models available PSPlay cannot guarantee that an automatic configuration will piece of work on all routers. Some routers even take a faulty UPnP implementation which likewise prevents an automated configuration.

If your router do not support UPnP or an automated configuration is not possible considering of security reasons you can but configure your router manually. All information for a manual configuration can be establish here. Below you can find an caption of the mutual error messages:

Router not found. Error: 0x15

This means that either UPnP is non enabled on your router or that the UPnP implementation of your router is not compatible with PSPlay. You accept to cheque if your router supports UPnP and if this characteristic is enabled. If it is enabled and information technology is still non working y'all accept to configure your router manually. All data for a manual configuration can be found here.

An fault occurred. Mistake: 0x00

An unexpected fault occurred while PSPlay was configuring your router. Exist sure you are connected to the same WiFi network than your PS5/ PS4. Your router might non fully support UPnP or is blocking the configuration attempt because of security reasons. Y'all might demand to configure your router manually. All information for a manual configuration tin be found hither.

Could not automatically configure router. Mistake: 0x16

Your router does not permit an automatic configuration considering of security reasons. You have to configure your router manually. All data for a transmission configuration can exist found here.

An unknown fault occurred. Mistake: 0x17

An unknown mistake occurred while configuring your router. Your router may not fully support UPnP or the UPnP version of your router is not compatible with PSPlay. You take to configure your router manually. All information for a manual configuration can exist found here.

Router partially configured. Warning: 0x05

Not all port forwarding rules could be configured correctly. Some routers do non allow to automatically configure port forwarding rules for ports smaller than 1024 and PS4 requires that port 987 must exist forwarded in gild to wakeup your console from sleep. You can probably play remotely but you will not be able to wake up your PS4 while you lot are not at domicile if you lot haven't registered PSPlay with your PS4 by using the PSN login. Information technology is strongly recommended to configure your router manually and add together the missing port forwarding rule. All information for a transmission configuration can be found here.

Dissimilar public IPs detected. Alarm: 0x06

Your router returned a unexpected public IP-Address. This could be an indication that your provider does not requite your router a "existent" public IP-Address. This means your router is not reachable from outside your network. Other possibilities for this warning could be that you take a double NAT configuration at home (your router is behind some other router which creates two unlike networks) or that you are using a hybrid router with two different network technologies like DSL and LTE. The latter should not be a problem, however if you accept a double NAT configuration at dwelling house or if your cyberspace provider does not provide your router a real public IPv4, playing over the net will probably non exist possible for you. In any instance you should contact your internet provider and ask if your router has a "existent" public IP-Address and if not if they tin can assign you lot one.

Your router has no IPv4-Accost. Warning: 0x07

If your router does not take an IPv4 simply only an IPv6 IP-Accost you lot can not connect to your PS5/ PS4 from outside your network. You must contact your internet provider and ask if they can assign your router an IPv4-Address in add-on to your IPv6-Address.

Gamepad push button mapping #dorsum to height

If you are using a controller where the push mapping is messed up or you only want to modify the button mapping, y'all can create a button mapping profile by clicking on "Button mapping" in the navigation drawer. After providing a unique button mapping contour name you can start to map private buttons of your gamepad. Just be sure your gamepad is properly connected via Bluetooth or via USB. Delight be aware that your gamepad might behave differently whether it is connected via Bluetooth or USB, so yous may take to create two individual button mapping profiles.

On some devices a push button on your gamepad may be interpreted as "Dwelling" button, if that is the case you can utilize the "Use 2 buttons combination" feature to trigger this button by pressing a combination of two other buttons on your gamepad. You can also utilize this feature if you lot take too few buttons on your gamepad left. Again: if one of your buttons on your gamepad volition be interpreted as "Home" button you volition non be able to use it as an application can not override this behaviour.

Troubleshooting #back to top

Problems with PSN login

More detailed instructions are available here. You should definitely read this if you take PSN login problems

Recently, some users reported problems when performing the PSN login. They will get an error message "A connection to the server could non exist established". This seems to be an error on the Sony PSN login website. This PSN login is required since PS4 firmware 7.0 to become your PSN-Account-ID which is required for registering with your PS5/ PS4. There are some other possibilities to get your Account-ID.

You lot can become to a PC and open up this website and only follow the instructions that appear at that place. Please note, in the event of the trinket website your actual account id is next to the user_id variable and should wait something like this

'user_id': '4474834823397313449'

Information technology consists just of numbers. Here again is the full link of the trinket webpage:

https://trinket.io/embed/python3/52183a157e?outputOnly=true&runOption=run&first=result&showInstructions=true

If you are all the same getting the aforementioned error or some other error please exist certain the PSN credentials you are inbound on the Sony PSN login page are correct otherwise y'all could also effort using a complimentary VPN service and pretend you're in a land other than the one you lot are actually in (also using another Browser might help). Then try to follow the instructions of the website higher up again.

If that doesn't work either just write me an electronic mail at f.grill160@gmail.com I volition find out your Account-ID which you can then use to register with your PS5/ PS4 without performing a PSN login. All I need for that is your PSN user name. Please note that I may be living in a different time zone than you, so it may accept some time for me to reply to your email.

If you take successfully queried your Account-ID you tin register with your PS5/ PS4 manually without performing a PSN login. In the Register view of PSPlay but activate the "Advanced Settings" check "Register PS5 manually"/ "Register PS4 manually" and add the Business relationship-ID in the textbox.

Thanks to CSystem77 for providing this script at trinket.io.

My controller isn't working and the mapping feature doesn't register any inputs

It'due south very likely that you are suffering from an Android 11 issues introduced by Google. Yous can find more than information here. Here is the official Google problems study with a few suggested workarounds https://issuetracker.google.com/issues/163120692?pli=1. On some devices, it helps to disable all accessibility services and restart the device. It'southward really an abrasive issue which is already stock-still in Android 12. It'southward not the fault of PSPlay.

Poor connection quality

If possible be sure your Android device is connected to a 5GHz WiFi network instead of a two.4GHZ. 5GHz networks are unremarkably less decumbent to interference.

Be sure your PS5/ PS4 is connected to the internet via LAN cable.

Lower the resolution and the FPS settings.

Some Android devices are afflicted by a network performance problem. In order to prepare this only place your Android device in flight mode and re-enable WiFi afterwards. Restart the PSPlay app and check if information technology works. Furthermore, an active Bluetooth connection tin can too interfere the network stability on some devices. Delight cheque if the connection is more stable when you deactivate Bluetooth completely.

Registration fails

Be sure your smartphone is in the same network than your PS5/ PS4.

Be sure that your have enabled Remote Play on your PS5/ PS4. (PS5: Settings - System - Remote Play and actuate "Enable Remote Play". PS4: Settings - Remote Play Connection Settings and activate the "Enable Remote Play" checkbox)

Restart the PS5/ PS4 and the PSPlay app and effort again. Also, make sure that the device you're using PSPlay on doesn't have a VPN connection or an advertising-blocking app activated, otherwise the connection to your PlayStation could be blocked.

Connection fails

If yous are not playing over the internet exist sure that your smartphone and your PS5/ PS4 are continued to the same network.

If you play over the net and you have configured your router, please bank check your port forwarding settings again. Your PS5/ PS4 might got another IP-Address from your router at dwelling house or your routers public IP-Address might have changed. Please be aware that yous take to use "Remote Connect" in order to connect to your PS5/ PS4 over the internet and that yous take to provide the public IP of your router in the "Remote Connect" dialog. If y'all desire to connect remotely automatically, make sure your PlayStation has the latest firmware installed. Sometimes restarting the console could fix the trouble. More data can exist establish in the section Playing over the internet

Be sure your PS5/ PS4 is turned on or at to the lowest degree in rest mode. If a PS5/ PS4 is turned off PSPlay can't wake it upwardly. Also, make sure that the device y'all're using PSPlay on doesn't have a VPN connection or an ad-blocking app activated, otherwise the connexion to your PlayStation could be blocked.

PS5/ PS4 does non wake from rest manner

Please be certain that your PS5/ PS4 stays connected to the internet during rest mode. On PS5 navigate to Settings - Organization - Power Saving - Click Features Available in Residuum way and cheque if both the "Stay Connected to the internet" and "Enable Turning On of PS5 from Network" are activated. On PS4 navigate to Settings - Power Saving Settings - Set Features Available in Residue mode and cheque if both the "Stay Connected to the internet" and "Enable Turning On of PS4 from Network" are activated.

Crackling and/ or delayed audio when using a controller

If you have this problem, delight stop PSPlay and reconnect your controller to your device. Open the PSPlay again and connect to the PS5/ PS4, the problem should be gone. On some devices, connecting a controller while streaming could pb to delays and other issues. In guild to avoid this please e'er connect your controller earlier you start streaming.

No sound when using a wired Dualsense/ Dualshock controller

Despite huge efforts to make the sound work on all Android devices when a wired Dualshock controller is connected some devices still try to route the sound to the controller which will result in no audio at all while streaming. Even so, if yous have this problem there is a workaround. Just disable "automatic USB audio routing" in the developer options of your device. The developer options are subconscious by default, follow the instructions beneath to disable USB audio routing:

  1. Open the Settings app on your Android device
  2. (Only on Android viii.0 or higher) Select System.
  3. Curlicue to the lesser and select About phone.
  4. Scroll to the bottom and tap Build number 7 times.
  5. Return to the previous screen to find Developer options about the bottom.
  6. Disable "USB audio routing" in the programmer options
  7. Y'all may take to restart the PSPlay app and remove and reconnect the Dualshock controller

PSPlay does not work correctly on my Chrome Bone device

Chrome OS offers Android app support, even so some functionalities are limited and will not work. Get-go of all, automatically discover your PS5/ PS4 will not piece of work as the firewall on Chrome Os devices is blocking the discovery request. In order to annals with your PS5/ PS4 or to simply connect, y'all accept to enter the IP-Address of your PS5/ PS4 manually (if yous desire to connect over mobile data you have to enter the public IP-Accost of your router. You can find more information here). Furthermore, some Chrome Bone devices have faulty hardware decoders which may interfere the streaming experience. PSPlay was not designed especially for Chrome Os devices but only for Android and Android TV devices. I exercise not want to preclude installations on Chrome OS devices because on some Chrome Os devices PSPlay might work quite well, but please keep in mind that there could exist some potential limitations when yous are using PSPlay on Chrome Os.

Back up #back to top

Do you have a question or any bug?

At that place is a community available on reddit which yous can observe hither https://www.reddit.com/r/PSPlay. You find many answered questions there and y'all can mail service new questions if you need to.

If none of the above suggestions assistance, please contact me at f.grill160@gmail.com. In addition you should as well attach the PSPlay log file to your electronic mail past clicking the "Share log file" in the navigation drawer in case you run across some bug. I'll try to answer as soon equally possible.

Please include following information in your email.

  1. Smartphone model
  2. Android version
  3. Explain what yous did and what did not work
  4. Explicate what should be the expected behavior
  5. Include the PSPlay log file if possible

Source: https://grill2010.github.io/psplay/index.html

Posting Komentar untuk "PSPlay"